With a fluid cast to the right spot, irresistible presentation, and perfect timing, you set hook on a grumpy bass. An angry flip of the tail and she shows her power by stripping off twenty yards of line. The contest is on but never a worry enters your mind. Penn Clash spinning reels enhance an already high pressure drag with the introduction of a wave spring. Confidence follows through from hook set to landing the fish. An oscillating spool lays even line on every retrieve, leaving you fully prepared for the next cast. Gain an edge with 8 sealed stainless steel bearings, and so much more. Jump right into this Penn Clash review and discover the facts about all 7 Penn Clash spinning reel models.
Penn Clash Models & Specifications
Models In The Penn Clash Review
Penn offers the 7 different size models in their Clash spinning reel series. All reels use the same material and components. They are also left and right hand interchangeable. Check all model sizes by model number below.
• CLA2000 • CLA2500 • CLA3000 • CLA4000
• CLA5000 • CLA6000 • CLA8000
Penn Clash Review – Specifications
Specifications provide a knowledge of abilities by model size and you’ll find them in this Penn Clash review. Penn Clash spinning reels come with a hard body metal frame and rotor. Despite the heavier material, the weight range isn’t bad. You carry 8.2 ounces with the smallest 2000 model and go up to 27.2 ounces in the CLA8000. This shows the true range in size of Clash spinning reels.
Braid or mono ready, you get a wide range in line specs with Penn Clash spinning reels. The lightest mono they’ll take goes with the smallest model. The CLA2000 provides 240 yards of 4 pound test. Prefer the braid? It’ll give 210 yards of 8 pound braided line. This is as light as the 2000 gets. Move up to the largest CLA8000 for 230 yards of 30 pound mono or 345 yards of 80 pound braid. That’s enough to handle decent size tuna, yellowtail, or amber jack. Saltwater is the realm of intended use for Penn Clash reels.
Drag capacity on Clash spinning reels gives more than an angler should need in relationship to the size of each model. Maximum drag ranges from 10 to a substantial 30 pounds, depending on the Clash model size. All Clash spinning reel models come with 8 bearings plus an anti reverse bearing. Gear ratio is very fast in the 2000 through 4000 models at 6.2:1. It drops a bit in the 5000/6000 models to 5.6:1, and moves down to 4.7:1 on the largest CLA8000.
Key Features In The Penn Clash Review
Features of Penn Clash spinning reels boast those special mechanical functions that give an edge. They define a reels purpose and special abilities. All reels have them, though not always as extensive as you’ll find in Penn Clash spinning reels.
- Full Metal Body – A solid frame eliminates reel flex. This allows the drag and gears to operate without fear of displacement or binding.
- Graphite Rotor – Helps keep weight down and is completely corrosion resistant.
- Sealed Stainless Steel Bearings – Stainless steel holds up better than other metals or ceramic in saltwater conditions. Additional shields keep grit or salt from entering the bearing chamber. These type of rollers last longer and need less care than inferior products.
- Anti Reverse Bearing – The benefit of an anti-reverse bearing is it’s instant stopping ability. There’s no play between setting the hook and engagement of the drag system.
- Dura-Gear Technology – CNC machining provides the gears in Penn Clash spinning models. Penn calls it their dura-gear system. Precise gear placement offers stronger teeth grip through better meshing, and leads to less wear over the long run.
- Leveline Oscillation – During the retrieve, Penn Clash spools oscillate up and down. In this manner the line has a guide onto the spool. It spreads the line across the entire spool face instead of laying it on top of itself to bunch up.
- Line Capacity Rings – Grooved lines on the inner walls of the spool alert anglers to the amount remaining. Helpful for awareness when battling stronger pelagic species. It’s also a handy notification when it’s time to re-spool the reel.
- Braid Ready Spool – Raised grips on the face of the spool keep braid from slipping while you spool the reel or put force against a stronger fish.
- Strong Aluminum Bail Wire – Cheap bails reduce the value of any spinning reel. If they break they render the reel useless until a replacement part comes in.
Wrapping Up The Penn Clash Review
Pros Of Penn Clash Spinning Reels
Penn Clash reels bring a strong frame, smooth retrieve, and powerful drag to every fishing encounter. Leveline oscillation paring with superior bearings offer longer casts and reduce wind knots. Customer Penn Clash reviews are almost entirely on the positive side, which is a true testament to their value.
Cons In The Penn Clash Review
Despite an overwhelming amount of pros, cons do exist with Penn Clash reels. Angler sometimes find the oscillation system to be off, placing too much line on the top or bottom of the spool.
Anglers have to wash and care for metal frames much more so than graphite. They’ll rust if they get a chip or are left with saltwater residue. The only other real drawback may be the lack of an ultralight 1000 or 1500 model. Anglers would then be able to apply 2 pound mono line.
Final Thoughts Of The Penn Clash Review
The overall value truly shines through in the above Penn Clash review. Fishermen can definitely opt for cheaper spinning reels, but they won’t perform as effectively nor last anywhere near as long. Make the move up to a quality spinning reel like the Penn Clash and they won’t disappoint. The large selection in model sizes means you can depend on Clash spinning reels for an enormous variety of fishing expeditions. Don’t clash with your equipment. Instead leverage Penn Clash spinning reels to dominate encounters with some of the strongest species in your waters.